Publikace

informace pocházejí z univerzitní databáze V3S

Autoři:
Ing. Radek Holý, Ph.D.; Havlik, J.; Ing. Marek Kalika, Ph.D.; Kasparek, M.
Publikováno:
2018, 2018 7th International Symposium on Next-Generation Electronics (ISNE), Piscataway, IEEE), p. 1-3), ISBN 978-1-5386-1445-7, ISSN 2378-8607
Anotace:
This document deals with integration of a recent semiconductor components within rapidly growing automotive sector. Researchers combined advanced technologies and proven car communication concepts aiming to development of demanded functionalities and demonstrating them on two use cases. Researchers started with technology analysis, have done defined experiments on the new components and specified representative use cases. Outcomes of the research will address two main stakeholder groups - car users and vehicle infrastructure operators enabling them entirely new comfort of taking care of vehicles both on professional and user basis.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Havlik, J.; Makarov, A.
Publikováno:
2018, 2018 3rd International Conference on Intelligent Green Building and Smart Grid (IGBSG), Piscataway, IEEE), p. 1-4), ISBN 978-1-5386-0661-2
Anotace:
The article deals with the design of the IoT communication platform for real HVAC operation, which is designed for the design of intelligent buildings. For its own implementation, the existing RS485-based access systems infrastructure will be used, extended by wireless gateways. The data obtained is stored in a cloud environment where the datamining methods are then evaluated.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Havlik, J.; Schlechter, J.; Krejsa, P.; Janda, L.; Ing. Marek Kalika, Ph.D.; Ing. Radek Holý, Ph.D.
Publikováno:
2016, 2016 Smart Cities Symposium Prague (SCSP), New York, IEEE), ISBN 9781509011162
Anotace:
The article describes the architecture and use cases of the vehicle's external control unit (BBCU - BODY & BOARD CONTROL UNIT) for the vehicle communication within global traffic systems including traffic security and safety (Car2Car, Car2Infrastructure concepts supported), IoT architectures as well as Smart Cities applications. The BBCU is an embedded system optionally supplemented with graphical user interface installed inside the vehicle and designed to fulfil three basic functions. The function of an event recorder storing data from sensors installed both inside and outside the vehicle. It monitors and records data of the trip and other significant events. The other function is the communication with peripheral systems installed inside the vehicle (IR cameras, RFID readers etc.). The third function is the analysis of data received from peripheral systems and transmission of data to the system eCall as under preparation and other transport applications. What has to be safeguarded for this purpose are free interfaces, computing capacity, safe and fast data storage.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Milan Koukol, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jan Krčál, Ph.D.; Ing. Radek Holý, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2016, 5th International Symposium on Next-Generation Electronics, ISNE 2016, Piscataway, IEEE Operations Center), p. 112-113), ISBN 978-1-5090-2439-1
Anotace:
The project deals with the implementation of new security elements to an access system designated for sites and premises that have to be protected against unauthorised entry or where access to certain parts of the site should be restricted. The electronic access system can substitute single key systems. The system offers a wide range of applications (registration and signalling of non-standard entries, forced entries, failure to close) and combination with external security systems. The access control system can be deployed separately or as a part of an attendance control system registering arrivals or adherence to prescribed working hours.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Neruda, M.; Vojtěch, L.; Rohlík, M.; Hájek, J.; Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.
Publikováno:
2015, 2015 24th Wireless and Optical Communication Conference (WOCC), Piscataway, IEEE), p. 113-117), ISBN 978-1-4799-8854-9, ISSN 2379-1268
Anotace:
New designed power systems of electric and hybrid vehicles influence other systems by generated disturbing electromagnetic field. One of the promising measures to mitigate this negative effect can be found in additional shielding of cables, which can be provided by electrically conductive textile materials. This paper focuses on verification of utilization of specifically designed shielding textile material, which are used as additional cable shielding in order to prevent undesirable effects of electromagnetic disturbance on data transmission. The results of our measurements verify that this concept provides advantageous characteristics of electrically conductive textile materials such as shielding capability, elasticity and easy handling.
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.
Publikováno:
2015, International Conference on Control Engineering and Information Systems, London, Taylor & Francis), p. 857-861), ISBN 9781138026858
Anotace:
Contactless chip technology has its supporters and opponents. Supporters favor the clearance rate, longer life and other advantages, opponents refer to “chip totality” and loss of privacy. To further extension, it is necessary to define an adequate level of safety in unique user identification and rules that are defined in the security implemented in all systems where the identifier is used. For this purposes, specific infrastructure information systems are used.
Typ:
Stať ve sborníku z prestižní konf. (Scopus)

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Vopařil, L.
Publikováno:
2015, Proceedings of The 4th International Symposium on Next-Generation Electronics, Piscataway, IEEE Operations Center), ISBN 978-1-4799-4208-4
Anotace:
This paper presents already built a public key infrastructure in the university environment. Infrastructure was established to enhance the security and credibility of the university systems and as a support for the development of a fully electronic flow of documents at the university. The article describes the main elements of the PKI along with the problems that had to be solved when deployed to a specific environment of the university.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jana Kaliková, Ph.D.; Havlík, J.; Barák, P.; Neburka, J.
Publikováno:
2014, Proceedings of 2014 International Conference on Intelligent Green Building and Smart Grid, Piscataway, IEEE Operations Center), ISBN 978-1-4673-6123-1
Anotace:
Nowadays ICT technology is infiltrated to all areas of human existence and the number of objects, animate or inanimate, actively acting within Internet services is rapidly growing. The reasons of object monitoring are permanently changing and evolving, following the development of public and non-public sectors. For example using of various tags, stuck on goods, are used for goods identification in stores and for security reasons for many years. Further, the assets identification using passive tags turns to active identification enabling automatic inventorying and permanent assets protection at the same time. Active identification provides also the remote monitoring of objects, moreover, when object's data are safely shared on Internet environment, a number of cloud services can be enabled to allow customers remote monitoring of objects. Based on such ICT environment, the architecture called Internet of Things is ready to come to daily life. The objects considered in such systems can be home appliances, medical devices, building assets, computers, mobile devices, cars, production components, manufacturing tools, building materials and, of course, people. Especially the bindings and relations among objects, for example an identified person having an expensive identified device and passing unauthorized zone is evaluated as a risk transaction resulting to a denied access. Beside the object identification the differentiation of static and moving objects brings a new important parameter to improve the IoT concept.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Luo, F.; Chou, Y.-F.; Cheng, R.-G.; Ing. Marek Kalika, Ph.D.; Ing. Radek Holý, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2013, Advances in Electrical and Electronic Engineering, 11 (5), p. 309-315), ISSN 1336-1376
Anotace:
Multicast and broadcast service (MBS) is a point-to-multipoint service where data packets are transmitted simultaneously from a single source to multiple destinations. In MBS, some base stations (BSs) may form an MBS zone and transmit identical MBS contents simultaneously using the same modulation and coding scheme. Hence, the network has to coordinate the transmission of BSs such that BSs belonging to multiple MBS zones may utilize non-conflict resources to transmit different MBS contents. This paper extends the work in [1] for accommodating MBS zones with different service presence probabilities and various bandwidth requirements. A continuous allocation algorithm and a non-continuous allocation algorithm are presented to allocate resource units for overlapping MBS zones. Simulations were conducted to verify the effectiveness of the proposed algorithms.
DOI:
Typ:
Článek v periodiku excerpovaném databází Scopus

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2013, The 2013 International Conference on Control Engineering and Information Technology (ICCEIT), Piscataway, IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC.), p. 651-654), ISBN 978-1-4673-5957-3
Anotace:
Contactless chip technology has its supporters and opponents. Supporters favour the clearance rate, longer life and other advantages, opponents refer to "chip totality" and loss of privacy. To further extension, it is necessary to define an adequate level of safety in unique user identification and rules that are defined in the security implemented in all systems where the identifier is used. For this purposes, specific infrastructure information systems are used.
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2013, Fourth International Conference on Information, Intelligence, Systems and Applications (IISA), 2013, New Jersey, IEEE), p. 136-139), ISBN 978-1-4799-0771-7
Anotace:
Currently, when development of applications and technologies is definitely aimed at global use, such trend must be supported by unequivocal identification of users. The basic principles support safety elements (integrity, indisputableness, resistance to known and supposed forms of attacks) and do not link application to a physical carrier (plastic). The application can be hosted on a bank payment card or NFC (near field communication), etc. To reduce safety threats the concept of unequivocal identification using ID cards and conditions, which they technologically produce, are used. Individual technologies used can be defined in ISO/IEC 14443 contactless chip and infrastructure based in HSM (Hardware Security Module) and individual SAM (Secure Application Module) can be defined by key management of the chip content.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Radek Holý, Ph.D.; Scherks, J.; Ing. Marek Kalika, Ph.D.
Publikováno:
2012, 6th International Conference on Signal Processing and Communication Systems, New Jersey, IEEE), p. 1-250), ISBN 978-1-4673-2393-2
Anotace:
Identification of persons in contact with the information systems of organizations is a very important aspect of the security of the entire system. One of the options used for this purpose is a smart card. Therefore added security in form of combination of more complex architecture and chip card with biometric is desired in today's world. In the implementation of the smart card technology it is necessary to emphasize the level of security, which affect how contactless or contact chip card applications in memory chip.
DOI:
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
Ing. Radek Holý, Ph.D.; Scherks, J.; Ing. Marek Kalika, Ph.D.
Publikováno:
2012, 2012 Second International Conference on Digital Information and Communication Technology and its Applications (DICTAP 2012), New Jersey, IEEE), p. 1-524), ISBN 9781467307338
Anotace:
Personnel identification is everyday struggle between each individual and security personnel. This is equally important on academic grounds where unauthorized individuals could access university resources and university research. We can assume that every academic individual poses university identification card that can be used for access to restricted areas, computers, library or cafeterias but this identity card can be lost, stolen or borrowed to someone else. Therefore added security in form of combination of more complex chip card architecture and biometric is desired in today's world.
DOI:
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
Ing. Radek Holý, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2012, 2012 International Conference on Anti-Counterfeiting, Security and Identification (ASID 2012), New Jersey, IEEE), p. 1-351), ISBN 978-1-4673-2143-3
Anotace:
Personal identification is everyday struggle between each identified individual and the security personnel. This is equally important on academic grounds where unauthorized individuals could access university resources and university research. Even in case that every member of the academic staff is a holder of the university identification card used for access to restricted areas, computers, library or cafeterias, this identity card can be lost, stolen or borrowed to someone else. Therefore added security in form of combination of more complex chip card architecture and biometric is desired to ensure a proper level of protection.
DOI:
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
Ing. Mgr. Michal Jeřábek, Ph.D.; Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Jan Krčál, Ph.D.; Krčálová, L.
Publikováno:
2010, ISBN 978-80-01-04606-7
Anotace:
Skripta vznikla na základě přednášek a cvičení autorů na Fakultě dopravní ČVUT v Praze v letech 2006 až 2010. Jsou v prvé řadě určena studentům bakalářského studia všech studijních oborů a obou forem studia. Slouží jako výchozí studijní materiál pro předmět Databázové a prezentační systémy, resp. Databázové systémy (reakreditovaný bakalářský program na 3 roky).
Typ:
Vysokoškolské skriptum v češtině

Autoři:
Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.; Ing. Radek Holý, Ph.D.
Publikováno:
2010, University Information Systems - Selected Problems, Warsaw, University of Warsaw), p. 356-360), ISBN 978-83-7641-356-3
Anotace:
The article deals with problems of use of ID cards for the users of CTU in Prague
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
prof. Ing. Zdeněk Votruba, CSc.; Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.
Publikováno:
2004, ISBN 80-01-02896-8
Anotace:
Toto vysokoškolské skriptum podává výklad teorie systémové analýzy doplněný vyřešenými příklady
Typ:
Vysokoškolské skriptum v češtině

Autoři:
Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.; Moos, P.
Publikováno:
2003, EISCO 2003, Aalborg, EISCO), p. 45-55)
Anotace:
This article deals with European perspectives in transport.
Typ:
Stať ve sborníku z mezinár. konf.

Autoři:
Moos, P.; Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.
Publikováno:
2003, ČVUT v evropském výzkumném a vzdělávacím prostoru, Praha, České vysoké učení technické v Praze), p. 65-69), ISBN 80-01-02909-3
Anotace:
Tento příspěvek se zabývá konceptem znalostní sítě ČVUT
Typ:
Stať ve sborníku z lokální konf. česky

Autoři:
prof. Ing. Josef Jíra, CSc.; Jírová, J.; Ing. Marek Kalika, Ph.D.; Klečková, J.
Publikováno:
2003, Doprava a telekomunikace pro 3. tisíciletí, Praha, České vysoké učení technické v Praze, Fakulta dopravní), p. 67-70), ISBN 80-01-02741-4
Anotace:
Z řady počítačových tomografických snímků byl sestaven model konečných prvků lidské lebky. Tento zjednodušený model z konečných prvků se používá pro analýzu dislokací a stavů namáhání lebeční kosti účinkem koncentrovaného tlaku nebo nestejnoměrně působícího tlaku.
Typ:
Stať ve sborníku z fakultní konference česky

Autoři:
Moos, P.; Ing. Marek Kalika, Ph.D.; Ing. Jana Kaliková, Ph.D.
Publikováno:
2003, Doprava a telekomunikace pro 3. tisíciletí, Praha, České vysoké učení technické v Praze, Fakulta dopravní), p. 199-204), ISBN 80-01-02741-4
Anotace:
Prezentace koncepru strukturální formulace segmentů informačních systémů s cílem využití těchto formulací ke stanovení citlivostí systémů na jednotlivé operace.
Typ:
Stať ve sborníku z fakultní konference česky

Autoři:
Ing. Marek Kalika, Ph.D.
Publikováno:
2002, Proceedings of the Fifth International Scientific Conference - Electronic Computers and Informatics 2002, Košice, Vienala), p. 233-239), ISBN 80-7099-879-2
Anotace:
Problematika analýzy v systémové integraci
Typ:
Vyzvaná předn. uvedená ve sborníku z mezinárodní konf.

Autoři:
Ing. Marek Kalika, Ph.D.
Publikováno:
2001
Anotace:
Dizertační práce se zabývá analýzou konfliktů při integraci systémů, doktorská disertační práce
Typ:
Disertační práce (PhD)

Autoři:
Ing. Jana Kaliková, Ph.D.; Ing. Marek Kalika, Ph.D.; doc. Ing. Drahomír Schmidt, Ph.D.
Publikováno:
2001, Proceedings of Workshop 2001, Praha, České vysoké učení technické v Praze), p. 50-53), ISBN 80-01-02335-4
Typ:
Stať ve sborníku Workshop ČVUT

Autoři:
Ing. Marek Kalika, Ph.D.
Publikováno:
2000
Typ:
Disertační práce (PhD)

Autoři:
Ing. Marek Kalika, Ph.D.
Publikováno:
2000
Typ:
Výzkumná zpráva v češtině