Publikace

informace pocházejí z univerzitní databáze V3S

Autoři:
Řada, J.; Ing. Tomáš Musil, Ph.D.; doc. Ing. Vít Fábera, Ph.D.
Publikováno:
2020, Proceedings of the SOFSEM 2020 Doctoral Student Research Forum, Aachen, CEUR Workshop Proceedings), p. 25-36), ISSN 1613-0073
Anotace:
Multistream Compression has proven to be competitive in terms of compression ratio. It utilizes a binary tree structure which follows practically the same rules for its construction as the Huffman method. This tree structure is ideal in terms of compression ratio for creation of codewords by Huffman compression. Comparing to the Huffman method the Multistream Compression is based on different idea of how to compress data. This fact raises the question whether the same tree structure provides the best performance. The presented paper investigates possible improvements of the tree structure. A genetic algorithm application was created for this purpose. The design of this application is presented in the paper as well as the obtained results. The whole application is set to the context of the MSC trees.
Typ:
Stať ve sborníku z prestižní konf. (Scopus)

Autoři:
Zoubek, O.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2019, Transaction on Electrical Engineering, 8 (2), p. 22-25), ISSN 1805-3386
Anotace:
This paper discusses the methods of optimal IIR filter FPGA implementation. The methods are focused on the reduction of occupied resources and increasing data throughput. Higher demands on an internal controller complexity are successfully solved by utilizing programmable microcode controller. The novelty of SOS core and its capabilities are presented and different variants of SOS core are assessed. The workflow of IIR filter design using MATLAB considering rounded coefficient method is demonstrated.
DOI:
Typ:
Článek v odborném recenzovaném periodiku cizojazyčně

Autoři:
doc. Ing. Vít Fábera, Ph.D.; Ing. Tomáš Musil, Ph.D.; Řada, J.
Publikováno:
2019, 2019 Konference - 25 let Fakulty dopravní, Praha, České vysoké učení technické v Praze), ISBN 978-80-01-06545-7
Anotace:
Kompresní algoritmus MSC (MultiStream Compression) je nová bezeztrátová kompresní metoda českého vědce Jiřího Kochánka. Jiří Kochánek implementoval svůj algoritmus softwarově v programovacím jazyce C. Na Fakultě dopravní ČVUT byla vytvořena první hardwarová implementace - do hradlového pole (FPGA). Části algoritmu byly transformovány na množinu spolupracujících konečných automatů a zapsány v jazyce VHDL. Navíc bylo nutné navrhnout speciální reprezentaci kódovacího stromu (Left Tree Representation) s ohledem na potřeby algoritmu.
Typ:
Stať ve sborníku z fakultní konference česky

Autoři:
Zoubek, O.; Kobrle, P.; Košťál, T.; Ing. Tomáš Musil, Ph.D.; Mňuk, P.; Zděnek, J.
Publikováno:
2017
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Künzel, K.; Košťál, T.; Zděnek, J.; Kobrle, P.
Publikováno:
2017
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zoubek, O.; Ing. Tomáš Musil, Ph.D.; Zděnek, J.; Kobrle, P.
Publikováno:
2017
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Kobrle, P.; Košťál, T.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2017
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zoubek, O.; Kobrle, P.; Ing. Tomáš Musil, Ph.D.; Košťál, T.; Zděnek, J.
Publikováno:
2017
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
doc. Ing. Vít Fábera, Ph.D.; Ing. Tomáš Musil, Ph.D.; Řada, J.
Publikováno:
2017, Neural Network World, 27 (6), p. 541-555), ISSN 1210-0552
Anotace:
This paper describes the first attempt of hardware implementation of Multistream Compression (MSC) algorithm. The algorithm is transformed to series of Finite State Machines with Datapath using Register-Transfer methodology. Those state machines are then implemented in VHDL to selected FPGA platform. The algorithm utilizes a special tree data structure, called MSC tree. For storage purpose of the MSC tree a Left Tree Representation is introduced. Due to parallelism, the algorithm uses multiple port access to SDRAM memory.
DOI:
Typ:
Článek v periodiku excerpovaném SCI Expanded

Autoři:
Zděnek, J.; Zoubek, O.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Zoubek, O.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Mňuk, P.; Zoubek, O.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Mňuk, P.; Zoubek, O.; Zděnek, J.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Mňuk, P.; Zoubek, O.; Zděnek, J.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Mňuk, P.; Zoubek, O.; Zděnek, J.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Zděnek, J.; Kobrle, P.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Zděnek, J.; Košťál, T.
Publikováno:
2016
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.; Künzel, K.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Brejcha, M.; Hájek, J.; Kobrle, P.; Košťál, T.; Künzel, K.; Mňuk, P.; Ing. Tomáš Musil, Ph.D.; Zoubek, O.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Zděnek, J.; Zoubek, O.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.; Košťál, T.
Publikováno:
2015
Anotace:
This research report contains the partial results of the Joint Research Center CNR-CTU project which deals with advanced methods for optimization of computer controlled electric drives parameters.
Typ:
Oponovaná výzkumná zpráva cizojazyčně

Autoři:
Ing. Tomáš Musil, Ph.D.
Publikováno:
2014, Mezinárodní Masarykova konference pro doktorandy a mladé vědecké pracovníky 2014, Hradec Králové, MAGNANIMITAS), p. 3369-3375), ISBN 978-80-87952-07-8
Anotace:
This paper deals with a new approach to designing high reliability and safety critical applications using Field Programmable Gate Arrays FPGAs). The presented concept is based on partial dynamic reconfiguration, the feature with prospect of making designs smaller in terms of chip area, easily verifiable and testable. Furthermore, the Safety Core principle is introduced.
Typ:
Stať ve sborníku z mezinár. konf. cizojazyčně

Autoři:
Malý, K.; Ing. Tomáš Musil, Ph.D.; Ing. Jindřich Sadil, Ph.D.; Sýkora, O.; Zelenka, J.
Publikováno:
2012, ISBN 978-80-01-05087-3
Anotace:
Skripta jsou souborem příkladů z elektrotechniky v rozsahu přednášené látky v rámci předmětu Základy elektrotechniky. Celý učební text je rozčleněn do jednotlivých tématických kapitol, které jsou věnované úlohám k procvičení látky z oblasti základních elektrických veličin, základních metod řešení stejnosměrných a střídavých elektrických obvodů v ustáleném stavu, obecných metod obvodové analýzy a přechodných jevů v lineárních obvodech se soustředěnými parametry.
Typ:
Vysokoškolské skriptum v češtině

Autoři:
doc. Ing. Martin Leso, Ph.D.; Ing. Tomáš Musil, Ph.D.
Publikováno:
2011, Neural Network World, 21 (5), p. 453-460), ISSN 1210-0552
Anotace:
This paper deals with a new approach to designing the micro-electronic system suitable for mass-parallel and neuronal structures realizations in which the high demand on safety and reliability is given. The presented concept is based on the FPGA platform. Authors point out various kinds of faults which can possibly occur during system cycle. Furthermore, authors introduce the Safety Core principle and define systems for which it is applicable. There are possibilities of using partial dynamic reconfiguration shown in this paper in the context of FPGA fabric testing, faults catching and correcting.
Typ:
Článek v periodiku excerpovaném SCI Expanded

Autoři:
Ing. Tomáš Musil, Ph.D.; doc. Ing. Martin Leso, Ph.D.; Jáneš, V.; doc. PhDr. Mária Jánešová, CSc.
Publikováno:
2010, Proceedings of the Work in Progress Session SEAA 2010 and DSD 2010, Linz, Johannes Kepler University), p. 8-9), ISBN 978-3-902457-27-1
Anotace:
This paper deals with a new approach to a design of the system with high demands for safety and reliability based on the FPGA platform. Authors point out various kinds of faults which can possibly occur during system cycle. Furthermore, authors introduce Safety Core principle and define systems which it is applicable for. There are possibility of using partial dynamic reconfiguration shown in this paper in context of FPGA fabric testing, faults catching and correcting.
Typ:
Stať ve sborníku z mezinár. konf.