Publikace

informace pocházejí z univerzitní databáze V3S

Autoři:
Ing. Jan Novotný; Ing. Filip Kotas; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2024
Anotace:
Zpráva se zabývá tématikou monitorování stavu posádky vozidla, realizací experimentů a analýzou dat.
Typ:
Výzkumná zpráva v češtině

Autoři:
Publikováno:
2023, Young Transportation Engineers Conference 2022, Praha, České vysoké učení technické v Praze), p. 44-48), ISBN 978-80-01-07224-0, ISSN 2336-5382
Anotace:
This paper describes the application of eye tracking technology in the automotive industry in the context of vehicle assessment in customer clinics. The paper presents the mentioned technology, the applied experimental methodology and selected results. In particular, the hypotheses that were expressed during the research of the topic and during the preparation of the experiment are answered. In this way, the innovative technology of eye tracking can be used to reflect the "voice of the customer" in the vehicle design.
DOI:
Typ:
Stať ve sborníku z prestižní konf. (Scopus)

Autoři:
Publikováno:
2023, 2023 Smart City Symposium Prague, New York, IEEE Press), ISBN 979-8-3503-2162-3, ISSN 2691-3666
Anotace:
Driver health monitoring is an increasingly discussed topic in the automotive industry. This article compares a smartwatch against an electrocardiogram (ECG) probe, both in terms of the ergonomics of the measurement and, of course, the accuracy. The evaluated variable is the heart rate variability (HRV), which can indicate the general health of a person or their stress. In this paper, the state of the art technology of measuring physiological functions of the driver is investigated. In next part the experiment is designed and implemented. Final part consists of evaluation of the experiment and discussion of the results.
DOI:
Typ:
Stať ve sborníku z prestižní konf. (Scopus)

Autoři:
Publikováno:
2022, 2022 Smart City Symposium Prague (SCSP), Vienna, IEEE Industrial Electronic Society), ISBN 978-1-6654-7923-3, ISSN 2691-3666
Anotace:
This article is about assessing whether eye-tracking technology is feasible as a tool for evaluating external HMI technology, which is a topic that will gain importance once autonomous vehicles become ubiquitous. For this end, research about external HMI concepts was done. Based on this research, two main set-ups of external HMI were identified. First consists of placing some form of signaling device (LED strips, light panels, etc.) on the front of the vehicle (upper part of the windshield or the grill). The second one is based on projecting the information on the road between vehicle and pedestrian. Experiment was carried out, simulating a pedestrian looking for external HMI clues whether to cross the street at unsignalized crosswalks. For the experiment, Tobii Pro Glasses II were used for detecting scene in front of the participant and their eye movement and fixation. The aim of the experiment was to ascertain whether the eye-tracker is usable in this kind of experiment, and if so, in what conditions. It was found out that for low traffic and certain weather conditions, eye-tracker can be used to distinguish a single vehicle from about 50 meters and finer elements can be distinguished from about 25 meters, which should be sufficient for external HMI evaluation.
DOI:
Typ:
Stať ve sborníku z prestižní konf.

Autoři:
Ing. Jan Novotný; Ing. Adam Orlický, Ph.D.; doc. Ing. Jaroslav Machan, CSc.
Publikováno:
2022, Driver-Car Interaction and Safety Conference 2021, Praha, České vysoké učení technické v Praze), ISBN 978-80-01-07105-2, ISSN 2336-5382
Anotace:
The subject of the research paper „EYETRACKING TECHNOLOGY IN AUTOMOTIVE INDUSTRY“ is to implement eyetracking technology into development of new vehicles and decision making process. This objective technology tracks eye movement of a participant, detects where the subject is looking during an interval of an experiment, and thus offers wide range of applications. It can be used to detect distraction while driving on simulator under a certain workload or to record objective data during otherwise subjective costumer oriented clinic. In this topic, we evaluate areas of the vehicle which are the most interesting for customers and therefore, provide support and recommendations for new vehicle designs.
DOI:
Typ:
Stať ve sborníku z prestižní konf. (Scopus)

Autoři:
doc. Ing. Jaroslav Machan, CSc.; Tobiška, J.; Ing. David Lehet; Ing. Jan Novotný
Publikováno:
2022, ISBN 978-80-01-07091-8
Anotace:
Kniha shrnuje teorii metod kvality užívaných ve fázi vývoje výrobku s důrazem na nutnost vědeckého přístupu k užití jednotlivých metod. Významná část práce je věnována zejména metodě QFD (Quality Function Deployment), dále metodám DFMAS/DFx a FMEA. Všechny metody jsou doprovázeny konkrétními příklady z automobilního průmyslu a aplikované postupy jsou podloženy praktickými zkušenostmi. Zdůrazněna je nezbytná provázanost mezi metodami kvality, kreativitou a inovativností.
Typ:
Vědecká kniha česky

Autoři:
Ing. Jan Novotný; Ing. Přemysl Toman; doc. Ing. Jaroslav Machan, CSc.; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2021
Anotace:
HMI Value study. Eye tracking implementation to vehicle interior analysis. Experiment with use of subjective and objective (ET) method.
Typ:
Výzkumná zpráva cizojazyčně

Autoři:
Publikováno:
2020
Anotace:
Experimental in-car validation of laser sensor prototype for measuring physiological functions. Potential and quality of the signal capturing and processing determination.
Typ:
Výzkumná zpráva cizojazyčně

Autoři:
Ing. Jan Novotný; Ing. David Lehet; Paprčka, O.
Publikováno:
2020
Anotace:
This report deals with the testing and validation of a prototype Neteera Terahertz sensor and its possible implementation in a vehicle for the purpose of vital signs monitoring.
Typ:
Výzkumná zpráva cizojazyčně

Autoři:
Paprčka, O.; Ing. Jan Novotný; doc. Ing. Jaroslav Machan, CSc.; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2020
Anotace:
Tato zpráva se zabývá problematikou standardizace a parametrizace zkušebních drah, a to virtuálních zkušebních drah a také reálných zkušebních drah.
Typ:
Výzkumná zpráva v češtině

Autoři:
Ing. Přemysl Toman; Ing. Jan Novotný; Ing. Alina Mashko, Ph.D.; Ing. Michal Malý; Jan Válek, DiS.; doc. Ing. Stanislav Novotný, Ph.D.; doc. Ing. Petr Bouchner, Ph.D.; Ing. et Ing. Naďa Tylová
Publikováno:
2020
Anotace:
Hlavním cílem studie bylo vytvoření systému měření HMI různých vozidel za použití objektivní a subjektivních metrik a analyzačních nástrojů, který je kompatibilní se systémy měření ve Škoda Auto. Stávající metodika byla obohacena o metody vyhodnocování pohledu a vizuální zátěže uživatele (eye tracking). Funkce systému byly ověřeny na reálném experimentu se zaměřením na řidičovu distrakci. Z výsledku vyplynou doporučení pro budoucí podobu uživatelských rozhraní HMI.
Typ:
Výzkumná zpráva v češtině

Autoři:
Ing. Jan Novotný; Ing. Přemysl Toman; doc. Ing. Jaroslav Machan, CSc.; Ing. David Lehet; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2020
Anotace:
Cílem studie je získat zákaznické kvalitativní posouzení designových prvků dvou vozů a tím vytvoření a ověření inovativní metodiky.
Typ:
Výzkumná zpráva v češtině

Autoři:
doc. Ing. Jaroslav Machan, CSc.; Ing. Přemysl Toman; Ing. David Lehet; Vacek, J.; Ing. Jan Novotný; Splítek, J.; Paprčka, O.; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2017
Anotace:
This technical report presents evaluation of the Questionnaire study of the project Easy Driving focused on controlling of Advanced Driver Assistance Systems from the point of view of the Human-Machine Interface with the focus on age groups. In the second part we in genral focus on anylsis of ADAS HMI in practise and further the report analyze problematic elements of controlling the Automatic parking system during practical experiment.
Typ:
Výzkumná zpráva cizojazyčně

Autoři:
doc. Ing. Jaroslav Machan, CSc.; Ing. Přemysl Toman; Ing. David Lehet; Ing. Jaroslav Pinkas; Ing. Jan Novotný; doc. Ing. Petr Bouchner, Ph.D.
Publikováno:
2017
Anotace:
Zákaznické posouzení funkčních vlastností pilotní mobilní aplikace.
Typ:
Výzkumná zpráva v češtině